Things To Keep In Mind While Installing Coolers

Share on facebook
Facebook
Share on twitter
Twitter
Share on linkedin
LinkedIn
Share on pinterest
Pinterest
Share on pocket
Pocket
Share on whatsapp
WhatsApp
Things To Keep In Mind While Installing Coolers

Things to Keep in Mind While Using Cooler: The summer season has arrived. In this season, the temperature rises so much that it is not possible to compete with the heat of the fan. Cooler and AC are needed to avoid heat. Although not everyone can afford to install AC. In such a situation, people consider it more correct to install a cooler. The cooler also comes cheaper than the AC and due to this, the electricity bill also rises less and the house also cools down a lot. In such a situation, if you are thinking of installing a cooler, then you need to pay attention to some things. Let us know about the important things

Check the wire and install- Before installing the cooler, check the wire. Because the cooler is installed for months and months, if you install the cooler without checking the wire, then there is a possibility of electrocution. All the wiring inside the cooler is water Keep in mind that do not touch it, otherwise there is a possibility of electrocution.

change grass We all are aware of the importance of grass in the cooler. If it has been used for a long time. Because of this, you may get disturbed in getting cold air. In this case, try to either change the grass or clean it regularly. So that the way of air is not blocked. Always apply light grass, gap between it. must be

attention to ventilation If you want to eat cool air from the cooler, then take care of ventilation. Wherever you keep the cooler, there should be an open space. If possible, do not keep it in the ground and fix it in a window of the house. The more open the space, the more it will give you cool air.

keep these things in mind

Make sure to check with an electrician once before running the cooler. Avoid repairing yourself. Also pay attention to whether the body of the cooler is correct or not. Many times the body of the cooler gets rusted. The body becomes weak and water flows from the cooler. In such a situation there is a possibility of electrocution. At the same time, in order to get cold air, do not fill excessive water in the cooler, due to which the motor gets damaged quickly.

Pipes have an important contribution in the cooler. Because it takes the water up to the cooling pad with the help of the motor. In this case, if the pipes are bent or damaged or dirt collects in it, then the cooler will not do cooling. In this case, keep these things in mind.

read this also: Why sunflower oil is considered beneficial for health, which people should start eating it

Source by [author_name]

Share on facebook
Facebook
Share on twitter
Twitter
Share on linkedin
LinkedIn
Share on pinterest
Pinterest
Share on pocket
Pocket
Share on whatsapp
WhatsApp

Leave a Comment

Your email address will not be published.

Never miss any important news. Subscribe to our newsletter.

Recent News

Editor's Pick